Збірник наукових праць. Галузеве машинобудування, будівництво
Викладення результатів досліджень із механізації будівельних робіт, проектування й експлуатації будівельних споруд, удосконалення будівельних конструкцій; розглянуті сучасні проблеми механіки ґрунтів, геотехніки та фундаментобудування
Assessment of the morphological composition of secondary construction waste from destruction.
The issues of post-war reconstruction of territories and settlements that suffered extensive dama...
Assessing the reliability of noise simulation models in a built-up area
In modern environments, noise is a dominant factor negatively impacting the urban ecosystem and, ...
Experimental and numerical study of full-scale reinforced concrete beams with 3DCP permanent formwork
The performance of a box-type permanent 3DCP formwork for full-scale reinforced concrete beams wa...
Збірник наукових праць. Галузеве машинобудування, будівництво. № 1 (62)' 2024.
У збірнику представлені результати наукових і науково-технічних розробок у галузі машинобудування...
Збірник наукових праць. Галузеве машинобудування, будівництво. № 2(63)' 2024
У збірнику представлені результати наукових і науково-технічних розробок у галузі машинобудування...
Comprehensive analysis of stability and strength of thin-walled reinforced concrete elements based on energy approaches
This work develops and substantiates a comprehensive engineering method for the analysis of thin-...
Modelling of Organo-Mineral Complexes in the System “Lime-Zeolite-Enzyme” for Purifying Technically Polluted Water from Suspended Solids and Compacting Sediment
The article presents the results of experimental and statistical modelling to determine the optim...
Mobile 3D Mapping Using Geodetic Drones and GPS Navigation
The article emphasizes the importance of evaluating the effectiveness of different mapping method...
Research on the drive of a plant for the preparation and transportation of building mortars
The article examines the theoretical study of the drive of a compact installation for the prepara...
Design of civil defense protective structures in residential multi-story buildings for individual use
The work examines the fundamental principles of approaches to designing individual protective she...
Numerical studies of the resistance of concrete keyed joints with rectangular keys in reinforced concrete structures
Numerical investigations were carried out on the behavior of keyed joints with rectangular keys i...
Changes in the Stress-Strain State of Precast Reinforced Concrete Floor Systems in Masonry Multi-Storey Buildings after Non-Design Impacts
The article is devoted to investigating non-design impacts on precast reinforced concrete floor s...
Study of factors affecting the energy consumption of the mixing plant for the preparation of aerated concrete
The current stage of development of the construction industry is characterized by increased requi...
Restoration measures for foundations of metal silos on degraded loess soils
This paper examines the restoration of the serviceability of foundations of steel silos located o...
Analysis of the Possibility of Adapting Basement Premises in Multi-Story Buildings as Civil Protection Shelters
The article examines the possibility of adapting basement premises in multi-story buildings in li...
Calculation of steel-reinforced concrete structures made of cold-formed steel profiles under biaxial loading
The aim of the work is to establish theoretical dependences for determining stresses at the extre...
Cement-ash compositions with ash - fluidized bead removal
The results of studies of ash-fluidized bed removal by X-ray structural analysis, differential th...
Strength and force distribution of lap-welded composite longitudinal reinforcing bars formed during strengthening of reinforced concrete beam elements by increasing the cross-section in the tension zone
Strength and force distribution of lap-welded composite longitudinal reinforcing bars formed duri...
Experimental studies of the strength of masonry under axial and local compression
Experimental studies of the strength of masonry under axial and local compression
Development of the statistical approach to the calculation of building structures
Сучасний метод розрахунку будівельних конструкцій за граничними станами (раніше за допустимими на...
Elucidation of the technological conditions for the formation of alkali silicates heat-insulating products based on ash-removal of thermal power plants and liquid glass
The raw material mixture from the silicon-like techno genic component the ash-removal of thermal ...
Computer modelling of the flow structure in a combined mixer for aqueous suspensions with solid and gas phases
Computer modeling of multiphase flows in mixers for aqueous suspensions with solid and gas phases...
Sorting lines as an element of household waste management at the regional level
The article identifies the problems of household waste recycling, summarizes the data on the plan...
Mineral complex additive for concrete
Methods of accelerating the hardening of Portland cement without heat-moisture treatment, in the ...
Assessment of the morphological composition of secondary construction waste from destruction.
The issues of post-war reconstruction of territories and settlements that suffered extensive damage as a result of hostilities are considered. Rational design and construction solutions are propose...
Стаття 2026/04/30
Assessing the reliability of noise simulation models in a built-up area
In modern environments, noise is a dominant factor negatively impacting the urban ecosystem and, consequently, the health of city residents. Noise exposure reduces labor productivity and the effici...
Стаття 2026/04/30
Experimental and numerical study of full-scale reinforced concrete beams with 3DCP permanent formwork
The performance of a box-type permanent 3DCP formwork for full-scale reinforced concrete beams was assessed through experimental testing and numerical analysis. Eight beams were tested under four-p...
Стаття 2026/04/30
Збірник наукових праць. Галузеве машинобудування, будівництво. № 1 (62)' 2024.
У збірнику представлені результати наукових і науково-технічних розробок у галузі машинобудування, автомобільного транспорту та механізації будівельних робіт; із проектування, зведення, експлуатаці...
Книга 2026/04/30
Збірник наукових праць. Галузеве машинобудування, будівництво. № 2(63)' 2024
У збірнику представлені результати наукових і науково-технічних розробок у галузі машинобудування, автомобільного транспорту та механізації будівельних робіт; із проектування, зведення, експлуатаці...
Книга 2026/04/30
Comprehensive analysis of stability and strength of thin-walled reinforced concrete elements based on energy approaches
This work develops and substantiates a comprehensive engineering method for the analysis of thin-walled reinforced concrete beams with a cross-sectional width of b = 40 mm, which unifies the verif...
Стаття 2026/04/29
Modelling of Organo-Mineral Complexes in the System “Lime-Zeolite-Enzyme” for Purifying Technically Polluted Water from Suspended Solids and Compacting Sediment
The article presents the results of experimental and statistical modelling to determine the optimal composition of organomineral complexes for cleaning technically polluted water from suspended sol...
Стаття 2026/04/29
Mobile 3D Mapping Using Geodetic Drones and GPS Navigation
The article emphasizes the importance of evaluating the effectiveness of different mapping methods in terms of accuracy, execution speed, and cost-efficiency, which is especially relevant in the co...
Research on the drive of a plant for the preparation and transportation of building mortars
The article examines the theoretical study of the drive of a compact installation for the preparation and pipeline transportation of construction mortars, the key design feature of which is the use...
Стаття 2026/03/25
Design of civil defense protective structures in residential multi-story buildings for individual use
The work examines the fundamental principles of approaches to designing individual protective shelters within the housing stock.
Стаття 2026/03/24
Numerical studies of the resistance of concrete keyed joints with rectangular keys in reinforced concrete structures
Numerical investigations were carried out on the behavior of keyed joints with rectangular keys in reinforced concrete elements under different failure mechanisms.
Стаття 2026/03/24
Changes in the Stress-Strain State of Precast Reinforced Concrete Floor Systems in Masonry Multi-Storey Buildings after Non-Design Impacts
The article is devoted to investigating non-design impacts on precast reinforced concrete floor systems of multistorey brick buildings that arise during military actions.
Стаття 2026/03/24
Study of factors affecting the energy consumption of the mixing plant for the preparation of aerated concrete
The current stage of development of the construction industry is characterized by increased requirements for theenergy efficiency of technological processes and the quality of building materials. T...
Стаття 2026/02/16
Restoration measures for foundations of metal silos on degraded loess soils
This paper examines the restoration of the serviceability of foundations of steel silos located on wetted and degradedloess soils.
Стаття 2026/02/16
Analysis of the Possibility of Adapting Basement Premises in Multi-Story Buildings as Civil Protection Shelters
The article examines the possibility of adapting basement premises in multi-story buildings in light of state buildingcode requirements.
Стаття 2026/02/12
Calculation of steel-reinforced concrete structures made of cold-formed steel profiles under biaxial loading
The aim of the work is to establish theoretical dependences for determining stresses at the extreme points of the cross-section of steel-reinforced concrete rod structures made of cold-formed steel...
Стаття 2026/02/12
Cement-ash compositions with ash - fluidized bead removal
The results of studies of ash-fluidized bed removal by X-ray structural analysis, differential thermal analysis and IR spectrometry are presented.
Стаття 2026/02/12
Strength and force distribution of lap-welded composite longitudinal reinforcing bars formed during strengthening of reinforced concrete beam elements by increasing the cross-section in the tension zone
Strength and force distribution of lap-welded composite longitudinal reinforcing bars formed during strengthening of reinforced concrete beam elements by increasing the cross-section in the tension...
Experimental studies of the strength of masonry under axial and local compression
Experimental studies of the strength of masonry under axial and local compression
Стаття 2026/02/12
Development of the statistical approach to the calculation of building structures
Сучасний метод розрахунку будівельних конструкцій за граничними станами (раніше за допустимими напруженнями).
Стаття 2026/02/12
Elucidation of the technological conditions for the formation of alkali silicates heat-insulating products based on ash-removal of thermal power plants and liquid glass
The raw material mixture from the silicon-like techno genic component the ash-removal of thermal power plants and the preparation methods of waterproof porous heat-insulated materials wide usage fo...
Computer modelling of the flow structure in a combined mixer for aqueous suspensions with solid and gas phases
Computer modeling of multiphase flows in mixers for aqueous suspensions with solid and gas phases opens up new opportunities for optimizing mixing processes in industry. The creation of CFD-DEM mod...
Стаття 2025/10/07
Sorting lines as an element of household waste management at the regional level
The article identifies the problems of household waste recycling, summarizes the data on the planned waste management infrastructure facilities, and substantiates the feasibility of building waste ...
Mineral complex additive for concrete
Methods of accelerating the hardening of Portland cement without heat-moisture treatment, in the presence of complex chemical additives -hardening accelerators and finely dispersed crystallization ...